胶砂流动度测定仪
Photo for reference; configuration may vary by order.
Model No. MFL-0001 · Cement & Mortar Testing Equipment
手摇式砂浆流动度跳桌（ASTM C230）
Where mains power is unreliable, a hand-cranked table still gives valid ASTM flow results. The polished bronze top is 255 ± 2.5 mm across and drops 12.7 ± 0.13 mm on each turn of the cam. A bronze Ø 100 mm by 50 mm flow mould, tamper and flow caliper come with it.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Where mains power is unreliable, a hand-cranked table still gives valid ASTM flow results. The polished bronze top is 255 ± 2.5 mm across and drops 12.7 ± 0.13 mm on each turn of the cam. A bronze Ø 100 mm by 50 mm flow mould, tamper and flow caliper come with it.
| Parameter | Value |
|---|---|
| Table top diameter 台面直径 | 255 ± 2.5 mm |
| Drop height 落距 | 12.7 ± 0.13 mm |
| Drive 驱动 | Hand crank with cam |
| Flow mould 截锥圆模 | Bronze, Ø 100 mm base, Ø 70 mm top, 50 mm high |
| Table top 台面 | Polished cast bronze, engraved lines |
| Frame 机架 | Cast iron with levelling base |
| Accessories 附件 | Tamper and flow caliper |
| Weight 重量 | Approx. 35 kg |
| Model No. | MFL-0001 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
