Model No. CFC-0001
Lever-Type Electric Cement Flexural Tester 5 kN杠杆式电动水泥抗折试验机 5 kN
- Maximum load
- 5000 N
- Lever ratio
- 1:50
水泥胶砂试模
Cement Mortar Moulds
Photo being updated
Photo for reference; configuration may vary by order.
Model No. MMO-0001 · Cement & Mortar Testing Equipment
Three-Gang Steel Prism Mould 40 × 40 × 160 mm
三联钢制胶砂试模 40 × 40 × 160 mm
Every EN cement strength result depends on prisms cast in an accurate, rigid mould. This three-gang steel mould forms 40 × 40 × 160 mm prisms to ± 0.2 mm, with HV 200 hardened walls on a base machined flat to 0.03 mm. Two end screws lock it together, and a 25 mm steel hopper is included.
- Specimen size
- 40 × 40 × 160 mm
- Number of compartments
- 3
- Dimensional tolerance
- ± 0.2 mm on width and depth
- Wall hardness
- HV 200 minimum
- Base plate
- Machined steel, flatness 0.03 mm
Packing & Shipping
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Product Description 产品描述
Every EN cement strength result depends on prisms cast in an accurate, rigid mould. This three-gang steel mould forms 40 × 40 × 160 mm prisms to ± 0.2 mm, with HV 200 hardened walls on a base machined flat to 0.03 mm. Two end screws lock it together, and a 25 mm steel hopper is included.
Highlights
- ± 0.2 mm internal tolerance
- HV 200 hardened partitions
- Base flat to 0.03 mm
- Filling hopper included
Applications
- Cement strength class testing
- Flexural and compressive prism casting
- Use on jolting and vibrating tables
- Cement plant routine QC
Specifications 技术参数
| Parameter | Value |
|---|---|
| Specimen size 试件尺寸 | 40 × 40 × 160 mm |
| Number of compartments 试件数 | 3 |
| Dimensional tolerance 尺寸公差 | ± 0.2 mm on width and depth |
| Wall hardness 隔板硬度 | HV 200 minimum |
| Base plate 底板 | Machined steel, flatness 0.03 mm |
| Clamping 紧固方式 | Two end screws |
| Hopper 下料漏斗 | Steel, 25 mm high, supplied |
| Weight 重量 | Approx. 10 kg with base |
| Compliance 符合标准 | BS EN 196-1, ISO 679, ASTM C348 |
| Model No. | MMO-0001 |
| Place of origin | China (dispatched from Shanghai) |
Applicable standards 适用标准
BS EN 196-1
ISO 679
ASTM C109
ASTM C348
ASTM C490
IS 10086
BS EN 1015-11
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Packing & Shipping 包装与运输
Export packing
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Loading port
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Inquiry Now 索取报价
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Related products
6 models
Model No. HHC-0001
Heat of Solution Calorimeter for Cement水泥溶解热测定仪
- Method
- Heat of solution in HNO3 and HF acid mixture
- Calorimeter vessel
- Vacuum flask, 650 mL, acid-resistant lining
Model No. MMO-0002
Polyurethane Triple Prism Mould 40 × 40 × 160 mm聚氨酯三联棱柱体试模 40 × 40 × 160 mm
- Specimen size
- 40 × 40 × 160 mm
- Number of compartments
- 3
Model No. MMO-0003
Three-Gang 50 mm Cube Mould ASTM C109三联50 mm立方体试模（ASTM C109）
- Specimen size
- 50 × 50 × 50 mm (2 in)
- Number of compartments
- 3
Model No. MMO-0004
Single 70.6 mm Cube Mould IS 10086单联70.6 mm立方体试模（IS 10086）
- Specimen size
- 70.6 × 70.6 × 70.6 mm
- Face area
- 50 cm²
Model No. MMO-0005
Length-Change Bar Mould 25 × 25 × 285 mm Four-Gang四联长度变化试模 25 × 25 × 285 mm
- Specimen size
- 25 × 25 × 285 mm
- Number of compartments
- 4