元素分析仪
Photo for reference; configuration may vary by order.
Model No. ELM-0002 · Chemical Analysis Equipment
惰性气体熔融氧氮氢分析仪
Titanium and zirconium producers watching hydrogen, steelmakers controlling oxygen and nitrogen, and copper refiners checking oxygen will find the ranges they need here. Furnace power up to 8 kW melts 0.1–1.0 g at roughly 2000–3000 °C. Hydrogen reads from 0.05 ppm, oxygen from 0.1 ppm to 5 %; each run takes 60–150 s.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Titanium and zirconium producers watching hydrogen, steelmakers controlling oxygen and nitrogen, and copper refiners checking oxygen will find the ranges they need here. Furnace power up to 8 kW melts 0.1–1.0 g at roughly 2000–3000 °C. Hydrogen reads from 0.05 ppm, oxygen from 0.1 ppm to 5 %; each run takes 60–150 s.
| Parameter | Value |
|---|---|
| Oxygen range 氧测量范围 | 0.1 ppm–5% (m/m) |
| Nitrogen range 氮测量范围 | 0.1 ppm–3% (m/m) |
| Hydrogen range 氢测量范围 | 0.05 ppm–0.05% (m/m) |
| Furnace power 炉功率 | Up to 8 kW |
| Furnace temperature 炉温 | ≈ 2000–3000 °C |
| Sample mass 称样量 | 0.1–1.0 g |
| Analysis time 分析时间 | 60–150 s |
| Oxygen repeatability 氧重复性 | SD ≤ 0.3 ppm or 1% RSD |
| Carrier gas 载气 | Helium or argon, ≥ 99.995% |
| Cooling water 冷却水 | Closed-loop chiller, 10–20 °C |
| Model No. | ELM-0002 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
