闪点测定仪
Photo for reference; configuration may vary by order.
Model No. FPT-0001 · Petroleum Testing Equipment
手动彭斯基-马丁斯闭口闪点测定仪
Labs testing only a handful of lubricant, diesel or solvent samples a day can meet ASTM D93 Procedure A/B and ISO 2719 without automation. The operator applies the gas flame or electric igniter by hand while the cup is stirred at 90–120 rpm and heated at 1–6 °C/min. Range is ambient to 370 °C; sample about 70 mL; 220 V, 500 W.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Labs testing only a handful of lubricant, diesel or solvent samples a day can meet ASTM D93 Procedure A/B and ISO 2719 without automation. The operator applies the gas flame or electric igniter by hand while the cup is stirred at 90–120 rpm and heated at 1–6 °C/min. Range is ambient to 370 °C; sample about 70 mL; 220 V, 500 W.
| Parameter | Value |
|---|---|
| Test method 试验方法 | ASTM D93 Procedure A/B, ISO 2719 |
| Temperature range 温度范围 | Ambient to 370 °C |
| Temperature resolution 温度分辨率 | 0.1 °C |
| Heating rate 升温速率 | 1–6 °C/min adjustable |
| Stirring speed 搅拌速度 | 90–120 rpm |
| Sample volume 试样体积 | About 70 mL |
| Ignition source 点火源 | Gas flame or electric igniter |
| Power supply 电源 | 220 V, 50 Hz, 500 W |
| Model No. | FPT-0001 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
