聚合物分析用热重分析仪
Photo for reference; configuration may vary by order.
Model No. TGAA-0005 · Polymer Analysis Equipment
聚合物分析用热重-质谱联用仪
For trace evolved gases, residual monomers or water and solvent release profiles, a mass spectrometer gives sensitivity FTIR cannot match. A capillary heated to 200–300 °C feeds an electron multiplier detector covering m/z 1–300 at up to 1000 amu/s. The TGA reaches 1000 °C with 2–10 mg samples.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
For trace evolved gases, residual monomers or water and solvent release profiles, a mass spectrometer gives sensitivity FTIR cannot match. A capillary heated to 200–300 °C feeds an electron multiplier detector covering m/z 1–300 at up to 1000 amu/s. The TGA reaches 1000 °C with 2–10 mg samples.
| Parameter | Value |
|---|---|
| Mass range 质量范围 | m/z 1–300 |
| Coupling interface 联用接口 | Heated capillary at 200–300 °C |
| Scan rate 扫描速率 | Up to 1000 amu/s |
| Detector 检测器 | Electron multiplier |
| TGA temperature range 热重温度范围 | Ambient to 1000 °C |
| Heating rate 升温速率 | 0.1–50 °C/min |
| Balance resolution 天平分辨率 | 0.1 µg |
| Typical sample mass 典型样品量 | 2–10 mg |
| Purge gas 吹扫气体 | Helium, ≥ 99.999% |
| Vacuum system 真空系统 | Turbomolecular pump, two-stage |
| Model No. | TGAA-0005 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
