聚合物分析用热重分析仪
Photo for reference; configuration may vary by order.
Model No. TGAA-0001 · Polymer Analysis Equipment
聚合物热稳定性分析用热重分析仪
To compare the thermal stability of competing grades or confirm that a flame retardant shifts decomposition onset, this TGA is the core tool. It heats from ambient to 1200 °C at up to 100 °C/min, with 0.1 µg resolution and ±0.1% weighing accuracy. Nitrogen, argon, air and oxygen can be switched during the run.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
To compare the thermal stability of competing grades or confirm that a flame retardant shifts decomposition onset, this TGA is the core tool. It heats from ambient to 1200 °C at up to 100 °C/min, with 0.1 µg resolution and ±0.1% weighing accuracy. Nitrogen, argon, air and oxygen can be switched during the run.
| Parameter | Value |
|---|---|
| Temperature range 温度范围 | Ambient to 1200 °C |
| Heating rate 升温速率 | 0.1–100 °C/min |
| Balance resolution 天平分辨率 | 0.1 µg |
| Weighing accuracy 称量准确度 | ±0.1% |
| Typical sample mass 典型样品量 | 5–20 mg |
| Atmosphere control 气氛控制 | Nitrogen, argon, air, oxygen, switchable |
| Purge gas flow 吹扫气流量 | 20–100 mL/min |
| Crucible volume 坩埚容积 | 70–150 µL |
| Temperature calibration 温度校准 | Curie point standards |
| Power supply 电源 | 220 V, 50/60 Hz |
| Model No. | TGAA-0001 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
