沥青混合料旋转压实仪
Photo for reference; configuration may vary by order.
Model No. GYC-0004 · Bitumen & Asphalt Testing Equipment
旋转压实仪试模套装 150 mm
Mould wear opens the inside diameter and changes specimen density. This set has three hardened steel moulds of 149.90–150.00 mm bore and 250 mm height, at least 48 HRC, with six ground end plates. An internal finish of Ra 1.6 µm or better helps specimens extrude cleanly.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Mould wear opens the inside diameter and changes specimen density. This set has three hardened steel moulds of 149.90–150.00 mm bore and 250 mm height, at least 48 HRC, with six ground end plates. An internal finish of Ra 1.6 µm or better helps specimens extrude cleanly.
| Parameter | Value |
|---|---|
| Inside diameter 内径 | 149.90–150.00 mm |
| Height 高度 | 250 mm |
| Material 材质 | Hardened steel, 48 HRC minimum |
| Wall thickness 壁厚 | 7.5 mm minimum |
| End plates 端板 | 2 per mould, hardened and ground |
| Quantity 数量 | 3 moulds with 6 end plates |
| Surface finish 内表面粗糙度 | Ra 1.6 µm or better |
| Compliance 执行标准 | AASHTO T 312 |
| Model No. | GYC-0004 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
