标准贯入试验设备
Standard Penetration Test (SPT) Equipment
标准贯入试验设备
Standard Penetration Test (SPT) Equipment — Geotechnical Field Testing Equipment
The SPT N-value is still the most widely reported field index for sand density and foundation design in boreholes. We supply manual donut and safety hammer sets, automatic trip hammers, trailer-mounted boring rigs, split-barrel samplers with liners, and hammer energy measurement systems. Borehole depth, drilling method and whether you must report energy-corrected N60 values decide the configuration. Kits are built to the dimensions in ASTM D1586 and BS EN ISO 22476-3, with energy checks following ASTM D4633.
5 models
Range code SPN
OEM available
Applicable standards
ASTM D1586
ASTM D4633
ASTM D6066
BS EN ISO 22476-3
IS 2131
AASHTO T 206
How to specify
- Confirm the drill rod thread type so the anvil and adaptor fit your existing rods.
- An automatic trip hammer gives far more consistent energy than a rope-and-cathead setup.
- Order spare drive shoes and core catchers; they wear quickly in gravelly ground.
Models in this range
5 models
Model No. SPN-0002
Automatic Trip Hammer for SPT 63.5 kg标准贯入自动脱钩落锤 63.5 kg
- Hammer mass
- 63.5 kg
- Drop height
- 760 mm, fixed by trip mechanism
Model No. SPN-0003
Trailer-Mounted SPT Boring Rig with Automatic Hammer拖车式标准贯入钻探机组（配自动落锤）
- Drilling depth
- Up to 50 m (SPT boreholes)
- Engine
- Diesel, 22 kW
Model No. SPN-0004
SPT Hammer Energy Measurement System标准贯入锤击能量测试系统
- Sensors
- 2 strain bridges + 2 piezoelectric accelerometers
- Instrumented rod
- AW or NW rod section, 0.6 m
Model No. SPN-0005
Split Barrel Sampler with Liner and Core Catcher带衬管和爪簧的对开式取土器
- Outside diameter
- 51 mm
- Inside diameter
- 38 mm barrel, 35 mm with liner